Bilt Hamber Touch On 1 Litre

TOUCH-ON is a pressure washer, pump-spray, trigger, or bucket applied durable hydrophobic ceramic paint protection treatment that additionally has low-foaming, powerful detergency for most second stage bucket washes so that you can further clean the paint while simultaneously applying protection following TOUCH-LESS cleaning.

Once applied, TOUCH-ON has dirt releasing properties too that works in conjunction with TOUCH-LESS in subsequent wash routines to produce superior contactless results.

TOUCH-ON is water based, is not flammable nor contains alcohol or petrochemical solvents.

How To Use:

SHAKE WELL BEFORE USE.

Vehicle must be cool and out of direct sunlight. Pre-wash with TOUCH-LESS cleaner to remove dirt or contamination on your paintwork. If further cleaning is required use AUTO-WASH concentrated shampoo and noodle wash mitt.

There are three methods that can be used to apply TOUCH-ON:

Pressure washer:

• Add 30ml into washer or lance reservoir, top up to
• 300ml with clean cool water. Shake well and apply
• under pressure to entire vehicle. Immediately rinse
• using pressure washer. Dry vehicle with a
• microfibre cloth or similar. Alternatively, an air
• blower can be used.

Bucket:

• Pour 30-60ml into a bucket then fill with 10 litres of
• warm water (preferably from a fast running tap), mix
• well. Apply using noodle wash mitt, sponge or
• similar. Rinse with clean water. Dry with a
• microfibre cloth or similar. Please note, this is not a
• high foaming bucket wash.

Trigger spray:

• Add 30ml to trigger bottle and top up to 1 litre with
• (preferably demineralised/deionised) water. Shake
• well. Trigger apply liberally, panel by panel, then
• thoroughly rinse with pressure washer or hose. Dry
• with microfibre towel or air blower.

Car must not be allowed to air dry as water spotting may occur.

NEW SIZE: 1 Litre